We carry a full range of corvette differentials and Rear suspension from complete differentials and USA parts to complete Trailing Arm Assemblies.
Up to 5-year limited warranties with No Gear noise included on Differentials and lifetime warranties on all Trail Arm Assemblies.
1963-1982 Corvette Differentials
TRAILING ARMS
OffSet Trailing Arms
5284
Price: $495.00 Pair
NEW Trailing Arms
5222
All Arms E-Coated, then Powder Coated, Made in PA, USA
Price: Each $195.00 1965-1982 shown
NEW Trailing Arms
5321
Rebuilt Spindle Assembly
Price: Each $195.00 1965-1982 shown
Rebuilt Trailing Arm Assembly - 1965-1979
5310
Price: $395.00 Each
NEW Trailing Arm
5353
Price: Each $895.00 1965-1982 with correct Flange
Trailing Arms- New Bare
Replace those worn rusted trailing arms, New complete Arms with bushings installed. Bring back that new car feeling.
Price: $190.00 each Bare Arm
1963-79
Complete Remanufactured 1963-79 corvette differentials with CNC Pre-Lapped New Ring & Pinion, Timken or Koyo USA bearings, CR seals, Eaton clutch pack with retainers, New side stub axles and a GM cover.
Price: $1895.00 freight included.
1963-1979
Re-manufactured Corvette Differential with a New CNC Pre-lapped Ring & Pinion, Eaton Clutch Pack with retainers, Posi Cross Shaft and Retaining Screw, Timken Bearings or Koyo USA
(6), CR Seals (3), Shims, Crush Collar, Ring Gear Bolts (10), Pinion Nut with hardened washer. 5 year street warranty that includes no gear noise.
Price: $855.00 with core in.
TECH NOTE: There are 2 different size pinion yokes
Re-manufactured with New Gear Set
1980-82
1980-82 Re-manufactured with New Gear Set Outright with no core charge, Freight Free.
Price: $1295.00.
New Eaton Positraction with 800 lb Springs and
Carbon Fiber Clutches
Price: $637.00
AUBURN PRO Positractions
1963-1979
3-Series 2.72-3.90 $599.00
4-Series 4.10 & Up $599.00
This Auburn is a Heavy Duty unit.
Dana 44 Differential
1980-1982
Remanufactured Differential with New Dana
Gear Set, Dana Clutch Pack, Posi Cross Shaft,
Timken Bearings (6), CR Seals (3), Shims & Ring
gear bolts, pinion nut. 5-year street warranty that
includes no gear noise.
Price: $869.00 with core in.
(for 3.31 gear set add $100.00)
NEW EATON Complete Positraction
3-Series 2.72-3.90 $568.00 (All Thick gears any ratio)
4-Series 4.10 & Up $568.00 (for thin ring gears)
NEW DANA TRAC-LOK POSITRACTIONS
1980-1982
3-SERIES 2.73-3.73 $455.00
4-SERIES 3.90 & UP $455.00
See our selection of 3-series direct fit Ring & Pinion Gear Sets.
AUBURN PRO POSITRACTIONS
1980-1982
3-SERIES 2.73-3.73 $496.00
4-SERIES 3.90 & UP $496.00
Rear Leaf Spring Hardware Kit
Allows ride height adjustments as well as side-to-side leveling.
* 2 Grade 8 bolts with grade 8 Nyloc retaining nuts
* 4 Cushions
* 4 Cushion retainers
* 4 Plates for mounting the rear leaf spring
Price: $49.95
Available With New Rotor 1965-1982, All parts are
NEW Half-Shafts
1963-1982
includes U-Joints and Flange
1963 to 1979 21/2" or 3' $169.00 Each
1980-81 w/Manual Transmission $189.00
1980-81 w/Automatic Transmission $189.00
1882 All $167.00
New Trailing Arms are Made in the USA
OEM Trailing Arm Alignment Shim Kit In Stainless Steel STAINLESS STEEL
Your rear alignment could be effected by rust-out alignment shims. Replace those rusted shims, improve handling, and reduce rear tire wear. Kit for 2 arms includes alignment shims (4 different sizes), 2 Grade 5 mounting pivot bolts, cotter pins, and castle nuts, this kit does both sides.
Price: $59.00
Trailing Arm Mounting Pivot Bolts
Price: $15.95/pair
Anchors bolt to frame, threw arm.
Caliper Mounting Bolts
Price: $2.50/each
With lock nut and washer (mounts t-arm to spindle)
Spindle Flange Castellated Nut
Price: $2.00/each
Trailing Arm Assembly w
Rotor 1965-1982 Shown. All New, No core required.
1963-64 Drum Brake Model Available.